![]() ![]() The Multicontroller program must not be installed on network drives. The Multicontroller program 7096 should have been installed in the „C:\TUNZE\Multicontroller7096“ folder. First of all a window will be appear displaying the following text: “Do you want to install TUNZE Multicontroller ?” Click “Yes”.” Subsequently a black “TUNZE Setup” window will appear with a flashing cursor wait for about three minutes until “Software installed” is displayed, and then press any key. After having read the instructions for use, install the program by clicking on the „Install program“ button causing a link to be placed on the desktop. ![]() Installation - connection to computer Insert the CD-ROM supplied along with the unit and a menu (1) will appear automatically permitting the selection either of the instructions for use (2) as a PDF file or the installation of the program (3) for Multicontroller 7096. Place the photo-electric cell connected in the light cone of the aquarium lighting see chapter titled „Night mode“ - operation in night mode”. (4) Use the screw and the nut to fasten the hose clamp. (2) Use the lower retaining screw to set the glass thickness (max. Photo-electric cell / moonlight Use the hose clamp, the screw, the nut and the separate holder to attach the photo-electric cell / moonlight to the clamp holder. ![]() Subsequently, remove the second protective foil and then position and adhere the Multicontroller at the requested position. Prior to adhering the strip, please make sure that the surface is clean, free from grease and smooth. Adhere the strip on to the housing (5) for this purpose remove the protective foil and press on. Place any connected photo-electric cell in the illuminated area under the aquarium lighting.Īttachment Multicontroller 7096 Use hook-and-loop strips for smooth plastic surfaces, for example. Control lamps should be visible the Foodtimer should be easily accessible ! (3) Place the cable connections in such a way that water cannot run down the cables and enter the Multicontroller. By no means attach above the aquarium ! (2) Observe the cable length of the units because connecting cables or photo-electric cells may not be extended. Selecting the position (1) The suitable wall has to be dry and protected against splashing water and humidity. Suitable for MS-Windows 98, 2000, XP, Vista and Win7. Scope of delivery: Multicontroller with photo-electric cell, moonlight, holder and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. It simulates various marine flow conditions in the aquarium and has been fitted with an especially bright LED moonlight. TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as well as some other new control possibilities. After adjustment by and saving on the computer, the data remain saved in the Multicontroller as well. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure: For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank. General aspects TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. It is the perfect synthesis between Singlecontroller 7091 and Wavecontroller 6091, and thus can synchronously or reciprocally control two Turbelle pumps:Wave simulation by setting the two pump outputs to maximum and minimum values as well as the pulse time.Oscillating flow for the direct or reciprocal operation of Nano Wavebox / Wavebox.Oscillating flow with Turbelle pump for the operation of Turbelle stream pumps.Automatic search of the resonance frequency in case of oscillating flow.Ramp function for a gentle start of the pumps.Foodtimer at the touch of a button after about eight to ten minutes, a restart is carried out automatically.If the Photo-Electric Cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.Tunze Aquarientechnik Multicontroller 7096 The new Wavecontroller 7092 fitted with a membrane keyboard is a control unit for all Turbelle pumps with electronic motor. Magnet Holder with Silence clamp up to a glass thickness of 15mm (1/2") NOTE: Kit includes 2 Tunze 6095 Pumps (Previous Model) and a FREE Tunze 7092 Controllerįor aquariums from 100 to 1000 litres(25 to 265 USgal.).įlow rate: 2,000 to about 9,500l/h(550 to 2,500 USgal./h) ![]()
0 Comments
Leave a Reply. |